|
Chevy Camaro 1967
355 CI 3200 LBS 10.19 @ 130 MPH
These pictures were taken after 200 1/4 mile runs @ 7500 RPM's 0.039" piston to head clearance with steel rods *********************************************************************  Grooved Briggs n Stratton head - dyno time only http://somender-singh.com/content/view/12/37/***********************************************************************  Un-grooved Flat top 355 after two years run time 0.040" piston to head clearance steel rods 11.06 @ 122 MPH
*************************************************************************
***********************************************************************
Grooved LS1 Generation III SBC head, after 500 miles
*********************************************************************
un-grooved production 5.3L Generation III SBC
after 60,000 miles
********************************************************************* 
Un-grooved Dodge Magnum factory 53006671 heads zero deck Dyno time only
********************************************************************
Only registered users can write comments.
Please login or register. |
Written by willypsb on 2009-11-02 04:44:23
What about diesel engine? |
Powered by AkoComment 2.0! |
Articles 
::click!::
