SOMENDER-SINGH.com

Josh wants to lower ET Revision 3

Newsflash

Spanish new-car sales plunge 30.8 percent in June
MADRID (Thomson Financial) -- Sales of new cars plunged 30.8 percent in Spain in June compared with the same month last year after suffering an annual fall of 24.3 percent in May, the Spanish automobile manufacturers' association reported Tuesday.
Sales came to 114,958 units last month.
New-car sales were down 17.6 percent at 702,365 in the first half of the year compared with the same ...

Continental eyes electrical autos as " diesel car demand declines " ????
FRANKFURT (Thomson Financial) -- Continental plans to replace what it sees as an increasingly sluggish demand for diesel fuel cars with supplies to the future trend of electrical cars, board member Karl-Thomas Neumann told Handelsblatt.
"Regarding diesel fuel, I'm more skeptical by now. There's not much happening in the U.S.," he said.
German carmakers expect the U.S. car market to ...

KEITH CRAIN
The only thing permanent is change
For as long as most of us can remember, the U.S. automobile business has had cycles. Whenever there was a down cycle, you knew you had to hang in there, and before long, things would come back to normal. And then you would see the cycle head upward again. It's not going to be that simple this time Keith Crain is publisher and editorial director of Automotive News. ...

The writing on the wall is getting visible ? ! Or better understood !

Grooved Forever !!!

God help those ............ who ............ ? Realize what is comming !

sing !!!

Main Menu

Site Feeds

Josh wants to lower ET Revision 3

With the Camaro running the 355 last night (9/28/2006) Josh ran 9.96 with wheel spin, it has more and the weather or the track wasn't its best!

***********************************************************

Update 12/09/2006:

60ft 1.299
330 3.997
1/8 6.258
1/8 mph 108.63
1000 8.221
1/4 9.895
1/4 mph 134.22

**********************************************************************

Well Josh realized four tenths of a second quicker and 130 plus MPH was more than the old truck could handle. One weekend of low ten second ETs was enough to sell him on a new race car. With a certified Camaro chassis, it looks like Josh is headed for 9 second ETs!

Josh said " Before the grooves, I had to change the oil every 20 passes, now it runs clean!"

Josh runs a S10 pickup with a 355 SBC; he's looking to step up the pace at the drag strip by the tune of four tenths of a second quicker. A complete new engine is in the plans with ported RHS heads, Singh's grooves and a new camshaft from Bullet racing cams. Stay tuned for all the details.

Image by cody polage; cool flashpics

http://www.coolflashpics.zoomshare.com/

Only registered users can write comments.
Please login or register.

Comments

Just wanted to say hi!
Written by Hal on 2010-02-08 22:40:52

What is up everyone? My name is Jessica. I am from Slovakia. I am new to the forum and just wanted to say hi.. I hope I posted this in the right section on your forum... [url=http://somender-singh.com/?8c61a40e8e14f611e2216c8b797]http://somender-singh.com/?8c61a40e8e14f611e2216c8b797[/url],

Just wanted to say hi!
Written by Jen on 2010-01-21 21:11:14

What is up everyone? My name is Jessica. I am from Slovakia. I am new to the forum and just wanted to say hi.. I hope I posted this in the right section on your forum... [url=http://somender-singh.com/?f1e2357c80b83f07259f155e9a7]http://somender-singh.com/?f1e2357c80b83f07259f155e9a7[/url],

Written by automotive breath on 2006-08-02 17:47:54

Thanks,
I developed the groove with help from Somender. My first attempt was done with a hack saw blade, lately I use a ball end mill finishing with a hand held file.

Written by stockersarewaycool on 2006-08-01 19:06:12

This deal is sweet. Automotive breath I like your work and I like the design of the grooves!

Impressive
Written by Guest on 2006-08-01 15:41:55

This is like wow!!
Totally impressive. Hope it works out

Next >

[ Back ]

Product!
::click!::

Press Articles

Web Conversations

Open Source Energy Network

Thursday, 29 July 2010